Technology and Services
Technology and Services

Silicon Wafer Polishing Machine: Humidity Sensor and Humidification Performance


Silicon Wafer Polishing Machine: Humidity Sensor and Humidification Performance


To ensure the effectiveness of humidification in silicon wafer polishing machines, we’ve switched from the original water-injection method to an atomization-based humidification system. Currently, most domestically produced small- and medium-sized polishing machines still rely on the traditional water-injection method for humidification. However, since these machines require only a limited amount of moisture, this approach often leads to uneven distribution of humidity, which can negatively impact the quality of the polishing process. By adopting an atomization technique, we’ve virtually eliminated humidity inconsistencies, significantly enhancing the overall polishing performance. The water is atomized using high-frequency vibrations, and this type of atomization device is readily available on the market.

After turning on the silicon wafer polishing machine, carefully place the workpieces into the polishing barrel—starting with a small amount and gradually increasing the quantity. The number, weight, and size of the workpieces all play a crucial role in this process. Therefore, as you add more pieces, reduce the rotation speed of the barrel. However, never let the workpieces come to a complete stop. If the workpieces remain stationary while the barrel continues to rotate, the polishing solution will be applied unevenly across the surface, leading to inconsistent results and unnecessarily prolonging the polishing time.

We’ve selected a humidity sensor from our silicon wafer polishing machine—this sensor integrates sensing and signal transmission into one compact unit, making it lightweight, space-efficient, reasonably priced, and easy to install. The sensor’s standard voltage signal is routed to another channel, where it’s sampled by a microcontroller and converted into a digital signal. This digital signal is then compared against the preset humidity threshold, enabling precise control of the humidification solenoid valve—specifically, determining whether the valve should open or close. The system employs three types of solenoid valves—large, medium, and small—to regulate the humidification level. This approach not only simplifies the overall system design but also ensures reliable performance and enhanced control accuracy.