Technology and Services
Technology and Services

What is the pressing process in the sapphire substrate grinding machine?


Due to the frequent replacement of broken extension rod connecting bolts, the flange surfaces of the extension rods have become uneven. Additionally, the surface of the press head on the hydraulic plate of the sapphire substrate grinder is also no longer perfectly smooth. As a result, during the pressing process, the load distribution on the bolts becomes uneven, increasing the risk of bolt bending under tension. Moreover, uneven tightening can lead to some bolts bearing excessive force, making them more prone to fracture during operation. Therefore, when the connecting flanges are uneven, they should be replaced promptly—and ideally, their material should possess high hardness and strength. When tightening the bolts, it’s crucial to use the hydraulic wrench correctly. The tightening sequence for the extension rod bolts must be carried out in three stages: first apply pressure up to 540 bar, then increase to 720 bar, and finally reach 960 bar. Applying full pressure in one go is strictly prohibited. The composite-function mold polishing machine integrates ultrasonic polishing with other conventional mold treatment techniques, making it a versatile, ultrasonic mold polisher that has become an essential and convenient tool for professionals involved in mold surface finishing.

The sapphire substrate grinding machine is the same size as the grinding wheel itself. The equipment’s grinding wheel can rotate at speeds up to 60 RPM, with an inner diameter of 310 mm and a thickness of approximately 15 mm. The correcting wheels have an outer diameter of 410 mm and an inner diameter of 360 mm, and the system requires three correcting wheels simultaneously. The maximum processing size must be smaller than 333 mm—any dimension exceeding this would necessitate a larger machine model. The motor delivers a power output of 7.5 kW, operates at 380 V, and is equipped with 3-phase power. Additionally, the cylinders can apply a maximum pressure of 200 kg, with three cylinders installed in total.